One of the common known ways of increasing your home’s value is through flooring upgrades. Despite the ever-changing flooring trends, you can never go wrong with a solid hardwood floor. However, if you want to secure the value of your home, you must first make sure that the flooring installation goes as planned. So what exactly goes on during hardwood flooring installation? If you are among the homeowners that don’t have a clue as to what the steps are in installing hardwood floors, better read on.
Steps pros follow when installing hardwood flooring
- Taking out the old baseboard – removing the baseboard is the first step when it comes to installing hardwood flooring. It’s also a good idea to upgrade the baseboard if you have the extra cash. To remove the baseboard, first, score the top edge of the base for clean removal. Using a small trim pry bar, gently remove the baseboard. Set the baseboard aside if you want to use it again after the installation.
- Prepping the subfloor – the next step in installing hardwood flooring is preparing the subfloor. This process takes more time than the actual laying of the hardwood floors. If you are replacing the carpet, the process could be shortened since it can be removed with ease. On the other hand, removing vinyl flooring can be a bit tricky. A lot of vinyl flooring is set on a particle board underlayment, which isn’t too good at holding down screws and nails.
- The second phase of subfloor preparation – the last bit of subfloor preparation is making sure that the surface is completely flat. Any uneven surfaces may cause some problems later on during the installation of hardwood floors. It is necessary that the subfloor is flat, free from protruding nails, or any bumps.
- Laying a moisture barrier – check with your local supplier for a recommendation. Moisture barriers are basically materials that keep things from sliding all over the place as well as keep moisture where it’s supposed to be.
- Racking the floor – the next step is laying out the floor. Although the trends keep changing, the fundamentals are always the same. Make sure that you have a table saw and miter saw handy during the process. Before nailing or stapling anything, be sure that they are first racked out and test fitted to ensure that everything is in place when it comes time to secure them.
- Installing the hardwood floor – while some professionals still use the old fashion way of nailing down floors, a pneumatic tool is much better. If you don’t already own one, you can also rent the tool. Although there’s perfectly nothing wrong with just using a hammer, a tired hand will create imperfections later on, especially if the flooring installation Florence is done on a wide area. A pneumatic tool ensures the hardwood is properly secured in place and the results will be mostly consistent.
- Installing the baseboard – after the floor has been nailed down, it’s time to reinstall the baseboard. If you plan to use the old one you have recently taken out, it’s perfectly fine. However, if you want to upgrade, you could always purchase a newer one with a better design.
Looking for a flooring installation professional to work with? Call Flooring Pros Florence today.
Flooring Pros Florence
Florence, SC 29501